Window Installation In Austin is a fairly simple project for many contractors. However, every brand of window has different instructions that must be followed.
The first step is to roll house wrap over the window opening. This prevents water and cold air from entering the home. A backer rod is installed next. This eliminates thermal bridging and seals the nailing flange.
Measurements will be needed to determine the size of your replacement window. While it is possible to do the measurements yourself, a professional will be able to take into account your unique home structure and potential frame adjustments.
Before starting any measurements, ensure that the old window is closed and that any screws holding the sash in place are removed. This will prevent any errors caused by uneven or inaccurate measurements. Additionally, make sure to clean the area around the window frame and sash to remove any debris or old putty that could interfere with the measurements.
Begin by measuring the width of your existing window opening. Position your tape measure horizontally between the left and right jambs at the top of the window, then move down to the middle of the window and finally, to the bottom. Record the measurements and highlight the smallest one, as this will be used to determine the width of your new window.
Next, you will need to measure the height of your existing window opening. Start by positioning your tape measure against the head jamb (the top horizontal board that sits above the window) and extend it to the bottom window sill. Do not confuse the window sill with the window stool, which is the bottom trim section that extends into the room. Repeat this process on the left, middle and right side of the window. Once again, highlight the shortest measurement, as this will be used to determine the height of your new window.
Lastly, you will need to measure the depth of your existing window opening. This will be determined by the distance between the inside window trim and the outside window stop strip. It is important to ignore any parting beads or trip strips in the window opening when taking these measurements.
Once you have recorded the above measurements, you will be able to order your replacement windows. Remember, to keep in mind that the height and width of your new window should be slightly smaller than the measurements taken for the existing frame to allow for shimming and insulation.
Removing the Old Windows
If you’re having new windows installed, the old ones must first come out. Depending on the type of window, it may need to be removed from the inside or outside. Canvas runners and tarps will be set up throughout your house to protect the floor from debris. This is an extra step we take to ensure your home remains clean and safe for the crew while they work.
The crew will start by cleaning the previous sealant areas that kept the old windows in place. They will also remove any molding that is on the outside of the frame or sill and the sash. They will then cut away any shims that were used to keep the window in place, as well as the jamb liners and parting beads on older wooden windows. If the new window is a full-frame replacement, they will also remove the trim around the window opening to ensure it fits correctly.
Insert replacements, on the other hand, use an existing frame and simply add a new sash to replace the old one. This is a less invasive installation method, which minimizes any disruptions to the wall and trim. This type of replacement is a good choice for historic homes or for homeowners who don’t want to address the exterior of their home.
Once the old windows are out, they’ll be removed section by section or room by room. This helps the crew stay on schedule and prevents having an entire room open while they wait for another part of the house to be completed. It’s also a great way to make sure the crew is not working on any windows that don’t need replacing. A tape note will be placed on the windows that are not being replaced so there’s no misunderstandings between crew members.
The next step is to prepare the opening for the new window by applying beads of caulk along the bottom of the frame and on the top of the sill. This will ensure the new window has a water-resistant barrier that keeps moisture and rain from seeping through the interior of the house. Shims are also sometimes used to ensure the window is plumb and level. Lastly, the crew will apply any necessary insulation, as well as a weather stripping around the edge of the new window to help reduce energy loss.
Installation
You’ve done the hard work of researching window options, choosing a contractor, and making detailed decisions about your new windows. Now, installation day is fast approaching. Before the crew arrives, you should take the time to clear away items that could be moved and to cover any surfaces you’d like protected during the construction process. It’s also helpful to let the team know if you have pets on the property so they can use extra care when moving furniture or cleaning around them.
Your contractor will carefully remove the old sash from the opening, taking care not to break or damage the glass or the surrounding trim. Then, they’ll clean and prepare the opening for installation of the new window frame. They’ll remove any caulking or sealant that’s holding the old frame in place. They’ll also clean off the sheathing, brick, sheetrock, and any other materials that are surrounding the window opening to make sure it is smooth, free of debris, and ready for the installation.
During window installation, the installers will measure and cut the frame to fit the size of the opening. Then, they’ll install the window in the opening and secure it with long screws through the main vertical sides of the frame known as jambs. After the window is set, the installers will caulk and seal the interior and exterior to promote energy efficiency, protect the windows from water, and ensure there are no gaps or leaks that could compromise the performance of the windows.
The final step in the window installation process is a walkthrough with your crew leader to make sure everything fits perfectly and functions properly. They’ll explain how to operate your new windows, show you how to clean them, and answer any questions you may have. They’ll then haul away and dispose of your old windows and any other leftover debris from the work area. They’ll also thoroughly clean up all areas where they’ve worked so it looks as if they never even came inside your home. This is a mark of a high-quality contractor.
Clean-Up
Whether you’re replacing one window or upgrading your entire home, renovation projects are messy. But it’s important to focus on clean-up afterward so that your home looks as beautiful and functional as possible. Especially when it comes to your windows, dirt can build up over time, causing unsightly stains and hindering the function of Low-E glass. Cleaning your windows regularly is essential, and this is where a professional can help.
Before the installation begins, the contractor will make sure that the opening is free of debris and caulking. They may use a utility knife to cut through any sealant that’s holding the old window in place, but they’ll be careful not to damage the surrounding frame or wall. They’ll also clear away any sash or frames that aren’t part of the new window, and they’ll recycle and dispose of the old materials.
Once the removal process is complete, the contractor will sweep and mop the area around each window to clean up any dust or dirt that’s accumulated. They’ll also take steps to protect surfaces in your home, such as floors and furniture, from construction debris by using drop cloths and plastic sheets. They’ll also create paths throughout your house so they can work more easily and minimize the amount of debris that’s spread around the home.
To keep your windows clean, you’ll want to mix together a simple solution of vinegar and water. This should be enough to remove most dirt and stains from the glass, but it’s always a good idea to add a little rubbing alcohol to your cleaner for stubborn spots. Adding a few drops of dish soap to your mixture can also help disperse grime and leave your windows looking sparkling clean.
While it’s not necessary to wipe down your window panes after every washing, you should definitely do so once a week or more. The more you use your windows, the more they’ll need to be cleaned, and a yearly deep clean is a good investment for keeping your windows as beautiful as possible. And don’t forget about your outdoor windows, either—they can be just as dirty as indoor ones.